RoIP Client Configuration

You will need to have been granted RoIP access by CSRAGMRS to use the repeater through the internet. The system can be accessed through any IAX client. DVSwitch and Zoiper are the recommended clients and detailed instructions for the various platforms are given in the following sections.

ANDROID DEVICES

So far the best contender for Android devices seems to be DVSwitch, available in the Google Play Store. Download and install as necessary. Zoiper is also available for these devices, and can be configured as below in the iOS tutorial.

  • DVSwitch setup instructions:
  • Select the ‘Accounts’ tab then select the first empty IAX2 slot and you should then see the screen below.

  • Enter the following settings:
  • Protocol: IAX2
  • Hostname: From your confirmation email
  • Port: From your confirmation email
  • Username: From your confirmation email
  • Password: From your confirmation email
  • Caller ID: Leave Blank
  • Caller Number: Leave Blank
  • Node: From your confirmation email
  • -Then select save.
  • -Go to the ‘Dialer’ screen and press the ‘Connect’ button and get the greeting message.
  • -Once connected press the PTT button to talk and press the PTT button again when finished talking.

When you are finished with the app select ‘Hangup’ to close the app.

iOS DEVICES

iOS devices will use the Zoiper app, which can be found in the Apple App Store. Download and install as necessary. Android devices can be configured the same way with this app. Once configured, you will need to dial 1000 to connect and should be met with a greeting. Once connected, the code to begin transmitting is *99, and # to stop transmitting. You will not hear a courtesy tone.

  • Zoiper setup instructions:
  • -Select settings located bottom right on screen.
  • -Select accounts.
  • -On the accounts screen tap the ‘+’ sign located top right of screen.
  • -On the screen “Do you allready have an account?” select yes.
  • -Select manual configuration.
  • -Select IAX Account and you should then see the screen below.

  • Enter the following settings:
  • Account Name: CSRAGMRS RoIP Network
  • Server: From your confirmation email (Enter Host Name:Port together on this line)
  • User name: From your confirmation email
  • Password: From your confirmation email
  • Caller ID: Leave blank
  • -After entering the above information select the ‘Register’ tab.
  • -You should then get ‘Registration Status: ‘OK’ message.
  • -Go back to ‘Dial Pad’ screen and enter 1000 then press the ‘Call’ button to connect to the system and get the greeting message.
  • -To begin transmitting enter *99, and # to stop transmitting. You will not hear a courtesy tone.

When you are finished with the app select ‘End Call’ to close the app.